Industrial electric heat supply made fast, simple, and accurate

 866-685-4443 | Get in Touch Online ...

HXL Series - Spiral L-Shaped

Click Here for Free Engineering Assistance

HXL Series heaters are PTFE-sheathed immersion heaters, resistant to most chemistries, built with a spiral element. The element is densely spiraled to take up minimal room in a tank bottom. They have a watt density of 10 W/in².

Choose a heater below to select your options and order.

Options available

  • Longer vertical lengths (cold zones).
  • Polypropylene guards*: recommended for applications up to 180°F (82°C).
  • Fluoropolymer (PTFE) guards: recommended for chromic acid or solutions over 180°F (82°C).
  • Special configurations.
  • Longer wire and conduit lengths.
  • Flexible continuous fluoropolymer leads (PIII protector only).
  • Lower watt densities for highly viscous solutions and technical acids.
  • Temperature and level controls sized to match the heater.

Support documents

HXL Over-the-Side PTFE L-Shaped Specification Sheet Thermal Overload Protection Chart
Please note that, before shipping any immersion heater, we will
email you to verify heater selection, and must receive your confirmation.

*Guard is required/included. Extended guard lengths available. Standard guard is polypropylene. Fluoropolymer guards recommended for chromic acid and solutions exceeding 180°F.

If you have any questions, or aren't sure which heater is right for your application, just send us an e-mail, fill out a contact form, or give us a call at (866) 685-4443, and we'll help you out. You can also get an easy quote on a built-to-order immersion heater using our Built-to-Order Immersion Heater Configurator.